Monday, November 22, 2010

Configuring a Cisco Router via TFTP

You can use the copy tftp command to configure the router via the Trivial File
Transfer Protocol (TFTP).

This is useful when you need to configure a large number of devices. The router copies the entire file via TFTP before it enters the commands into the running config.

Router#copy tftp:// running-config
Destination filename [ running-config] ?
Accessing tftp:// . .
Loading NEWCONFIG from (via FastEthernet0/0) : !
[ OK - 24 bytes]

24 bytes copied in 0. 192 secs (125 bytes/sec)

No comments:

Post a Comment