Thursday, March 31, 2011

Cisco Router EIGRP Configuration Example

This example configures EIGRP between a Cisco Router and Cisco LAN Distribution or Core Switch.

BGP routes are redistributed into EIGRP with a default metric (only bandwdith and delay used for metric calculation).

Cisco Router:

router eigrp 100
default-metric 100000 100 255 1 1500
network 10.4.0.0 0.0.255.255
redistribute bgp 65511
passive-interface default
no passive-interface Port-channel1
eigrp router-id 10.4.128.241 (loopback0)
no auto-summary

Cisco Switch:

router eigrp 100
network 10.4.0.0 0.0.255.255
passive-interface default
no passive-interface TenGigabitEthernet1/1/1
no passive-interface TenGigabitEthernet2/1/1
no passive-interface Port-channel1
eigrp router-id 10.4.32.240 (loopback0)
no auto-summary

No comments:

Post a Comment